Active extension cable AXAGON ADR-205 USB 2.0 cable length of 5 meters. The USB repeater cable strengthens the passing USB signal and allows you to connect significantly more USB devices than the usual 5 meters using passive cables. The total length of the USB route when combining this 5m length with other AXAGON USB cable systems up to 45 meters. A great advantage of the ADR-205 is the integrated power supply connector. In most cases, the power supply via the USB bus is sufficient, but for larger devices larger portions of USB power supply may be inadequate, and additional power from the network may resolve the issue in these cases. The remarkably compact body of the AXAGON repeater allows for trouble-free use in wiring or cable systems. The use of high-quality shielded cable ensures high communication speed and minimal undesirable interference.
The AXAGON ADR-205 active extension USB 2.0 cable has a length of 5m. The active part of the cable - the USB repeater amplifies a passing USB signal and allows to connect USB devices that are farther than 5m, which is the usual distance allowed by passive cables. With this device, you can connect several repeater cables in a row.
One of the cable's great advantages is that it is equipped with an integrated additional power supply connector. In most cases, supplying power via a USB bus is sufficient, but some more demanding devices may need an additional power supply.
The remarkably compact body of the AXAGON repeater ensures that you can hide it in cable management systems and organisers. In addition, it features a high-quality shielded cable that ensures high communication speeds and minimal interference.
active USB AM> A-F extension repeater cable
1x USB 2.0
Fully compatible with the USB 2.0 interface and backwards compatible with the USB 1.1 interface.
Transmission speeds: 1.5/12/480Mb/sec (low/full/high).
Supports Plug and Play and Hot Plug.
Two LEDs indicating power and USB connection.
Dimensions of the active part with a USB type A female connector: 65 x 22 x 13mm, USB cable length: 5m, ended with a USB type A male connector.
Cable weight: 178g.
Apart from the active USB cable, a common passive USB cable can also be used.
Powered via a USB bus (bus-power mode: 5V - 500mA).
For most connected USB devices, the USB bus power supply is sufficient and no additional power is needed.
The active part of the cable contains a connector (O 3.5x1.3mm - external x internal diameter) for an additional external power supply of 5V/1-2A.
Power adapter not included - AXAGON AC-5V2A recommended power adapter.
When powering the repeater cable with the power adapter, you can also connect an external 2.5" drive without the need for a separate power supply for the drive.
When you have multiple repeater cables connected in series, the USB bus supply may be inadequate and can be boosted by the additional power supply.
Supported Operating Systems:
MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012/2016 and later (supported by all 32- and 64-bit versions of Windows), MacOS 8.6 and later, Linux and higher.
Note: Drivers are included with supported operating systems and install completely automatically. No other drivers need to be installed and are not available.
USB 2.0 AM> Active A-F with a length of 5 m.