Refresh the page
Your shopping experience on Alza remains unchanged after Brexit. All customs clearance charges are covered by Alza. Learn more.

Seagate IronWolf Pro 8TB CMR

Special Offer
£189.08 without VAT

Seagate IronWolf Pro 8TB CMR

The Seagate IronWolf Pro 8TB CMR hard drive is one of the high load internal HDDs for 24/7 operation in data centres. 3.5" HDDs are designed chiefly for desktop PCs, data centres, and other data-processing devices. One of the key parameters is obviously the rotational speed of the HDD. The 7200 RPM RPM delivers better system response across the board. You can look forward to a total data capacity of 8000 GB. The drive has a 256 MB memory cache. You can link the Seagate hard disk and the PC or other devices is facilitated using the SATA III interface.

Seagate IronWolf Pro 8TB CMR Hard Disk Key Features

  • Read speed up to 240 MB/s and write speed up to 240 MB/s
  • 256 MB memory cache
  • Seagate 3.5" format disk for standard bays
  • Standard power consumption is 9,2 W, while in stand-by mode it holds at 1 W
  • It communicates with a PC or other devices through the SATA III interface
  • HDDs don't have much resistance against physical shocks, but they are also more affordable than the newer SSDs
  • RAID support allows for improved data loss prevention

Other Hard Disk Features

Standard HDDs are notable for their construction. Inside the enclosure there is a mechanism with moving platters accompanied by disk read/write heads. These mechanical parts are admittedly more sensitive to shocks, but at the same time you get an excellent price/storage capacity ratio. The crucial parameter that affects the speed of a platter hard disk is RPM - the number of revolutions per minute. In case of the Seagate IronWolf Pro 8TB CMR, you would get 7200 RPM RPM. This is ideal for demanding users, such as graphic or video editors - in short, people who work with large amounts of data. System responsivity and stability is also influenced by the disk buffer - the so-called cache. The Seagate HDD is equipped with a 256 MB cache that stores the last used data for their prompt retrieval and reading.

Connecting the Seagate Hard Disk

If you want to install the Seagate IronWolf Pro 8TB CMR in your computer or other device, it must be equipped with a 3.5" slot. All data transfer takes place via the SATA III interface with a speed of 3 Gbit/s. The technology ranks among the best HDD data transfer solutions available and delivers a speed of 600 MB/s.

Reviewed by 6 customers
customers have purchased
80 %
customers recommend
User Review
All ratings


Type and capacity

Format (Form Factor) 3.5"
Storage capacity 8,000 GB (8 TB)
Disk capacity 8,000 GB (7.81 TB)


Width 101.85 mm (10.19 cm)
Height 26.11 mm (2.61 cm)
Depth 146.99 mm (14.7 cm)


Weight 722 g (0.72 kg)


Colour Silver


Disc Series Seagate IronWolf


Use For computers, Data storage, Internal


Read Speed 240 MB/s
Write speed 240 MB/s
Data recording technology CMR
Memory cache 256 MB
Controller Seagate
Special features RAID
Maximum loudness 28 dB
Mean Time Before Failure 1,200,000 hr(s)
Work Load Rate 300 TB/Year


Typical power consumption 9.2 W
Standby consumption 1 W (1,000 mW)

Most commonly purchased accessories and similar products

Seagate IronWolf Pro 6TB CMR - Hard Drive
Seagate IronWolf Pro 6TB CMR
£208.90 £195.90
Add to Cart
Seagate IronWolf 6TB CMR - Hard Drive
Seagate IronWolf 6TB CMR
Add to Cart
AXAGO EE35-XA3 ALINE - External Box
Add to Cart
Vention SATA 3.0 Cable, 0.5m, Red - Data Cable
Vention SATA 3.0 Cable, 0.5m, Red
Add to Cart
Seagate IronWolf 4TB CMR - Hard Drive
Seagate IronWolf 4TB CMR
£102.90 £94.90
Add to Cart
Code:  FP985e2
Warranty: 60 months
Product Number:  ST8000NE001
Links: Producer's Website: